Why the BlockOut Cot Tent 2P Pitches Differently
The Kakadu BlockOut Cot Tent 2P is a tent cot: a double sleeping platform with an integrated tent body. That design changes the setup routine compared with a conventional tent. Instead of threading poles through sleeves, you unfold a stretcher frame that forms both the cot base and the tent structure. Kakadu states there is no assembly required thanks to the easy-fold stretcher frame, so the main work is unfolding, positioning, and adding the flysheet and awning poles.
That makes the BlockOut Cot Tent 2P setup a good match for campers who want an elevated bed without a long build. The supplied information does not include a step-by-step manufacturer sequence, so the guide below sticks to the actions the product facts support: unfolding the frame, adding the flysheet, and configuring the awning.
Step-by-Step: Pitching the BlockOut Cot Tent 2P
These steps follow the product's stated features. Where the supplied record does not give a specific technique, the step notes what to check rather than inventing a procedure.
- 1. Clear and level your sleeping spot: The cot tent is an elevated double, so choose ground that can hold the frame flat. The supplied information does not give a maximum slope or a leveling method, so check the site yourself before unfolding.
- 2. Unfold the easy-fold stretcher frame: Kakadu states the frame requires no assembly. Open it fully so the cot base and tent body take shape. If the frame does not sit flat, reposition the tent rather than forcing it.
- 3. Fit the No-See-Um mesh inner tent: The ultra-fine No-See-Um mesh inner tent is part of the design and enhances ventilation while keeping insects out. Make sure it sits smoothly so airflow is not blocked.
- 4. Add the 3000mm waterhead-rated flysheet: The flysheet provides the stated rain and wind protection. The supplied information does not include a pitching sequence for the flysheet, so follow the attachment points on your tent and check that it covers the mesh inner fully.
- 5. Set up the awning poles: Two awning poles are included, and Kakadu says they allow multiple awning configurations on the front and side. Use them to extend shelter where you need shade or rain cover. The supplied information does not specify pole lengths or angles, so adjust to your site.
- 6. Check ventilation and light blocking: BlockOut technology is designed to reduce internal temperatures by up to 20 degrees and block 95% of light. Once pitched, confirm the mesh is clear and the BlockOut layers are positioned as intended so those benefits are not compromised.
Product Facts That Shape the Pitch
- BlockOut® Cot Tent 2P: Easy-fold stretcher frame with no assembly required. This is the core of the setup: you unfold rather than assemble, which shortens pitch time.

BlockOut® Cot Tent 2P - BlockOut® Cot Tent 2P: 3000mm waterhead-rated flysheet provides protection from rain and wind. The flysheet is the weather layer, so fitting it correctly is a key checkpoint after unfolding.
- BlockOut® Cot Tent 2P: Two awning poles allow multiple awning configurations on the front and side. These poles are the adjustable part of the pitch and let you adapt shelter to sun or rain.
- BlockOut® Cot Tent 2P: BlockOut technology reduces internal temperatures by up to 20 degrees and blocks 95% of light. These benefits depend on the tent body and flysheet being pitched as designed, so check them after setup.
What to Check Before You Stake Down
The supplied record does not list stakes, guy lines, or a staking procedure, so do not assume they are included or required. Before you tension anything, walk around the pitched cot tent and confirm the frame is fully open, the mesh inner is not twisted, and the flysheet covers the body. If you plan to use the awning, decide on a front or side configuration first, because moving the poles later means resetting the flysheet.
Kakadu describes the BlockOut Cot Tent 2P as suitable for outback trips and weekend getaways. That is general positioning, not a weather rating beyond the stated 3000mm flysheet. In strong wind, the supplied information does not give a maximum limit, so use your judgment and seek sheltered ground if conditions look beyond the tent's design.
Packing Down and Storing the Cot Tent
The easy-fold frame is also the pack-down mechanism. The supplied information does not include a folding sequence or a packed size, so the points below focus on what the product facts support.
- Remove the awning poles first: Take down the two awning poles before collapsing the main frame so the flysheet is not stretched or trapped.
- Let the flysheet dry: The supplied information does not give a drying time or storage instruction. As a practical habit, avoid packing a wet flysheet for long periods.
- Fold the stretcher frame: Reverse the unfolding action. Because Kakadu states no assembly is required, there are no loose poles to lose, but check that the frame folds evenly.
- Keep the mesh clear of the frame: The No-See-Um mesh is fine and can catch in the frame. Guide it clear as you fold.
Where the Supplied Information Stops
This guide covers the actions the product record supports: unfolding the frame, fitting the mesh inner and flysheet, and using the awning poles. It does not include a manufacturer setup video, a torque or tension specification, a maximum wind rating, or a packed weight and size. If you need those details for a specific trip, check the product page or contact Kakadu before you rely on the tent in demanding conditions.
For a double elevated sleeper who wants a short pitch and a darker, cooler lie-in, the BlockOut Cot Tent 2P is built around exactly that. The setup is less about construction and more about placing the frame well, fitting the flysheet, and choosing your awning configuration.


